The Panic Button in the GuardsPro Guard Mobile App helps you quickly notify your security team when you need assistance or guidance while on duty.
When you activate the Panic Button, the Back Office team receives a buzzer alert on the Back Office Dashboard, along with your post site details and live location. Your guard icon also starts blinking on the Dashboard, Post Site Map, and Profile Map, making it easier for the team to identify your location and provide assistance.
This feature helps you stay connected with your security team and allows them to respond promptly when you need support.
📌 Prerequisites
Before using the Panic Button, make sure that:
- You are logged in to the GuardsPro Guard Mobile App.
- You are assigned and checked in to the relevant post site.
- Location permission is enabled on your device, with Precise Location turned on, to ensure your accurate location is shared with your security team.
- You have a stable internet connection to send the alert and share your location with the Back Office team.
Important Note : The Panic Button is intended for non-emergency assistance only. If you are facing an emergency, dial 911 or contact your local emergency authorities immediately.
✅ This guide will help to activate, use and deactivate the panic button using the GuardsPro Guard Mobile App.
Step 1: Locate the Panic Button
Open the GuardsPro Guard Mobile App.
Navigate to the Post Sites tab.
Select the relevant post site.
Make sure you are checked in to the selected post site.
Locate the Panic Button option within the post site details.
Step 2: Activate the Panic Button
Press and hold the Panic Button for 3 seconds.
Once activated, a confirmation message will appear on your screen, indicating that Panic Mode is active.
You can tap the Panic Button again to view the details of other guards, if any, assigned to the same post site and available to assist you.
After activation, the Back Office team will receive a buzzer alert on the Back Office Dashboard, displaying the relevant post site details and your live location. This helps the team identify your location and respond promptly.
Step 3: Deactivate the Panic Button
The Panic Button remains active until you manually deactivate it.
To deactivate Panic Mode:
Locate the activated Panic Button in the selected post site.
Press and hold the button again to deactivate it.
Once deactivated, the Panic Button alert will no longer remain active.
🎉 That's It!
By following these simple steps you can activate and deactivate the Panic Button using the GuardsPro Guard Mobile App, allowing your security team to identify your location and provide the necessary assistance.
If you have any questions or need further assistance, please contact the GuardsPro Support Team.
Comments
0 comments
Please sign in to leave a comment.